Table of Contents
Advertisement
Installation
To use the NMPJ function, you must install the NMPJ software (hereafter, "the
software") on the computers to be used.
Instructions in this manual are for installation in a Windows 7 environment.
System Requirements
Software system requirements are as follows.
CPU
Core 2 Duo P8600, 2.4 GHz or higher (32- or 64-bit)
Memory
1 GB or more
HDD
32 GB or more
Monitor
Resolution: 1024x768 dots or more
Operating
Windows Vista (Business) SP2
System
Windows 7 (Home/Professional/Ultimate) SP1
Windows 8 (Pro)
Windows 8.1 (Pro)
* Windows Vista compatibility is limited to 32-bit editions.
* Both 32- and 64-bit editions of Windows 7 and later are supported.
Network
In TCP/IP network environments, projectors can be connected to
computers via the following LAN connections.
Wired LAN (1000BASE-T, 100BASE-TX)
Wireless LAN (IEEE 802.11b/g/n)
Magnification
Display magnification:
Cannot be installed on computers with display magnification set
higher than 200%.
Cannot be installed on computers without a minimum resolution of
1024x768. Additionally, operation is not ensured if the resolution is
switched to less than 1024x768 after installation.
• Operation is not ensured in other operating systems or editions.
• Menus are in English in all cases, except in Japanese and
Simplified Chinese versions of the software.
• Operation is not ensured in operating systems other than
English, Japanese, or Simplified Chinese OSes.
• Although the software also supports computer-projector
communication over a router, operation is only ensured over one
router hop.
• If you are using an Aero style in Windows, this message may be
displayed: "Do you want to change the color scheme to improve
performance?"
• When using wireless direct connection, configure the computer
to obtain a wireless IP address automatically (DHCP enabled).
Note that it is not possible to use wireless direct connection with
a projector that is not equipped with wireless LAN functionality.
14
Advertisement
Table of Contents
