Projecting a Video Image from an AV Equipment
You can project a video image with the steps similar to those for projecting an image from a
computer.
This section provides information specific to the projection from an AV equipment.
For more detailed information for each step, refer to the corresponding page.
1
Turn on the projector.
Connect the power cord and turn on the projector.
Adjust the height of the projecting image.
Select a display language for the first time.
Adjust the focus by performing the auto setup or the focus adjustment if you can-
not read the message due to out of focus.
2
Prepare the AV equipment.
Turn on the AV equipment and start playing the video image.
For digital content video image:
3
Press the
button to switch the input signal.
Select [DIGITAL VIDEO] as the input signal.
4
Press the
button twice.
Adjust the input signal, focusing, keystone distortion, and so on automatically
using the auto setup function.
5
Press the
button.
Select an appropriate image mode depending on the projecting image.
Select an appropriate screen mode from the [Aspect] menu.
Stopping projection...
Turn off the projector.
Turn off the projector and remove the power cord from the AC outlet.
P40*
P70
P60*
* Those steps are same as those for projecting the computer screen.
P40
P43
P41
P46, 51
P70
P73, 90, 91
P55*
69