Starting Projection - Canon SX7 MARKII User Manual

Canon projector user manual
Hide thumbs Also See for SX7 MARKII:
Table of Contents

Advertisement

Starting Projection

Connect the power cord and turn on the projector to start the projection.
Once the projector is turned off, it cannot be turned on for a while. Wait until the lamp is
cooled down and the [POWER] indicator lights in red.
Connect the Ground Terminal
Connect the ground terminal on the power plug to ground. Otherwise, the operating
computer may suffer electromagnetic radiation problems and poor reception by TV and
Caution
radio.
Unplug the Power Cord When the Projector is Not in Use
The projector constantly consumes approximately 7W power even when it is turned off.
To ensure safety, malfunction prevention, and power saving, remove the power plug
from the AC outlet when the projector is not used for an extended period of time.
1
Connect the power cord.
Fully insert the power cord plug into the socket.
The [POWER] indicator flashes red.
2
Remove the lens cap and press the [POWER] button.
The [POWER] indicator flashes green, and
then lights in green.
40

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

X700Sx60Realis sx7 mark ii d

Table of Contents