Canon SX7 MARKII User Manual page 67

Connecting to AUDIO IN Terminals (SX7 II/X700)
Connect an audio cable to the AUDIO IN terminal corresponding to the input image signal
if you want to use the projector's speaker.
Audio cable
SX7 MarkII/X700
The speaker outputs the audio signal corresponding to the selected image signal.
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
turns down the sound.
Connect the audio cable between the AUDIO OUT terminal and an external audio-visual
equipment if you want to output the audio signal to the audio-visual equipment (P68).
The built-in speaker is monaural.
AV equipment
AUDIO OUT terminal
(RCA terminal)
Commercial audio cable
(RCA/Stereo
mini jack)
Audio input terminal
(AUDIO IN)
(Stereo mini jack)
You can input an audio signal
corresponding to 3 image
input systems.
Connect to the AUDIO IN ter-
minal corresponding to the
type of the input image signal.
(Stereo mini jack)
for DEGITAL IN/ANALOG IN-1
for ANALOG IN-2
for VIDEO IN/S-VIDEO IN
Projector
67