Table of Contents
Advertisement
Extension Pipe RS-CL08 / RS-CL09 (Optional)
Use an optional extension pipe (RS-CL08 / RS-CL09) according to the ceiling height. For details,
contact our local agent.
Outer/inner pipes and outer/inner covers
M5 screw (12 mm/0.5"): 4 pcs.
M3 screw (10 mm/0.4"): 1 pc.
The length is adjustable between 35 cm/1.1'
and 55 cm/1.9' in steps of 5 cm/0.2'.
Mounting Position
Install the projector straight in front of the screen. You can adjust the screen position using the lens shift
feature.
Caution:
■
Before mounting the ceiling attachment, be sure to check the strength of the ceiling. The
ceiling should be strong enough to support the projector and ceiling attachment (and optional
extension pipe). If the ceiling is not strong enough, be sure to reinforce it. The projector may
fall and you may get injured.
■
Make sure to perform the installation operation by at least two persons. Please be careful not
to drop any object and pinch a finger during the installation operation.
■
To prevent falling caused by earthquake or vibration, take anti-fall measures using tension
wires or the like for installation. The projector may fall and you may get injured.
■
At least 30 cm (0.98') around the intake and 50 cm (1.64') around the vent should be clear.
Otherwise,it may damage the projector due to bad exhaust ventilation.
Installation Dimensions
Projection Distance
Height
RS-CL08
284 mm/11.2"
594 mm/23.4"
Side view
284 mm/11.2"
263 mm/10.4" 227 mm/8.9"
Outer/inner pipes and outer/inner covers
M5 screw (12 mm/0.5"): 4 pcs.
M3 screw (10 mm/0.4"): 1 pc.
The length is adjustable between 55 cm/1.9'
and 95 cm/3.1' in steps of 5 cm/0.2'.
104 mm/4.1"
310 mm/12.2"
310 mm/12.2"
230 mm/
9.1"
230 mm/
9.1"
Top view
85
RS-CL09
500 mm/19.7"
Front view
250 mm/9.8"
250 mm/9.8"
Advertisement
Table of Contents
