System Configuration - Furuno MU-170C Operator's Manual

SYSTEM CONFIGURATION

12-24 VDC
Equipment
FCV-1200L/1200LM*
CH-250
CH-270
CSH-5L/8L
FSV-24/24S
GD-280/380/680
FR-1500 MK3 series
FR-21X5 series
FAR-21X7 series
NavNet vx2
*: Not useable with the portrait type.
**: When inputting VGA, SVGA or XGA, the circle may be displayed as an ellipse because
the aspect ratio differs. In this case, select NORMAL from the DISP MODE menu item
on the RGB1, 2 or DVI menus. The top and bottom on the screen are blank, but it is
normal.
Connectable equipment
Resolution
VGA**
VGA**
VGA**
XGA**
SXGA
VGA**
XGA**
SXGA
SXGA
VGA**
About the TFT LCD
The TFT LCD is constructed using the
latest LCD techniques, and displays
99.99% of its pixels. The remaining 0.01%
of the pixels may drop out or blink, how-
ever this is not an indication of malfunc-
tion.
iv
RGB
DVI
VIDEO (NTSC/PAL)
Signal
Analog, via IF-8000
Analog, via IF-8000
Analog, via IF-8000
Analog
Analog
Analog
Analog
Analog
DVI
Analog
Radar, Video Plotter,
Navigator, Video Sounder,
Scanning Sonar, etc.
FAR-21X7 series, etc.
CCD camera,
Video cassette recorder, etc.