Furuno MU-170C Operator's Manual

MULTI-PURPOSE LCD DISPLAY
The purpose of this guide is to provide the basic operating procedures for this equipment. For
more detailed information, see the Operator's Manual.
Display Unit
Remote Controller
RGB1
RGB2
VIDEO1 VIDEO2
PIP1 PIP2
+
BRILL
MU-170C
Operator's Guide
LED Optical sensor
DVI
VIDEO3
PIP3
MENU
Key
Select menu item.
MENU Shows the main menu.
Shows the BRILL adjustment
BRILL
window.
Shows the DISPLAY selection
DISP
window.
PIP Shows the PIP selection window.
Turns the power on or off.
Changes color according to signal
status as below.
• Green: The selected signal to be
displayed is input correctly from
LED
the external device.
• Orange: The selected signal to be
displayed is not input from the
external device.
Optical Receives the signals from the
sensor remote controller.
Key
RGB1 Shows picture input to RGB1.
RGB2 Shows picture input to RGB2.
DVI Shows picture input to DVI.
VIDEO1 Shows picture input to VIDEO1 on
the entire screen.
VIDEO2 Shows picture input to VIDEO2 on
the entire screen.
VIDEO3 Shows picture input to VIDEO3 on
the entire screen.
PIP1 Shows picture input to VIDEO1 in
the picture-in-picture window.
PIP2 Shows picture input to VIDEO2 in
the picture-in-picture window.
PIP3 Shows picture input to VIDEO3 in
the picture-in-picture window.
BRILL (-) Decreases the display brilliance.
BRILL (+) Increases the display brilliance.
MENU Shows the main menu.
Select the menu items.
1
Function
Function