Note for Connecting to GV-VMS / DVR / NVR
The GV-IPCAM is designed to work with and record on GV-VMS / DVR / NVR, a video management
system.
•
Once the camera is connected to the GV-VMS / DVR / NVR, the resolution set on the GV-VMS /
DVR / NVR will override the resolution set on the camera's Web interface. You can only change
the resolution settings through the Web interface when the connection to the GV-VMS / DVR /
NVR is interrupted.
•
The login password of the camera cannot contain the character "&" or any whitespace when
connecting to GV-VMS.
•
The Video Analytic features under Intelligent (See 3.5 Intelligent in the User's Manual) cannot be
integrated with GV-VMS / DVR / NVR
Note for Installing Camera Outdoor
When installing the camera outdoor, be sure that:
1.
The camera is set up above the junction box to prevent water from entering the camera along
the cables.
2.
Any PoE, power, audio and I/O cables are waterproofed using waterproof silicon rubber or the
like.
3.
The screws are tightened and the cover is in place after opening the camera cover.
Note for Powering the Camera
The camera is powered by PoE. If you want to power the camera using the power
connector, an optional power adapter is required.
iii