Loading, Deleting Files - Furuno FSV-24 Operator's Manual

9. MEMORY CARD OPERATION
6. Select MEMORY CARD and press the [MENU] key.
7. Select SAVE PICT or SAVE CONFIGURATION as appropriate and press the
[MENU] key to store item selected.
8. Select QUIT and press the [MENU] key.
Note: If the following message appears, there is not enough space in the
Delete undesired files, referring to the following section, and try again.
9.2

Loading, Deleting Files

This section shows you how to load and delete files. You may load files on the
display to analyze echoes. When a memory card becomes full, you may wish to
delete unnecessary files.
When the sample configuration file is loaded, its contents "program" the
equipment, including the USER PROG control. (Only P1 of the USER PROG
control is programmed by the sample configuration file. Default settings are used
for P2 to P10.)
1. Press the [MENU] key to open the menu.
2. Select OTHERS and press the [MENU] key.
3. Select PRESET, MEMORY CARD and press the [MENU] key.
9-2
Formats memory card.
CARD OPERATION FORMAT SAVE PICT SAVE CONFIG QUIT
2000/01/01 00:01
File
list
2000/01/01 00:00
Date, time file
stored
Operation
READING
Progress bar
SAVING
(Squares fill
FORMATTING
with progress.)
Figure 9-2 MEMORY CARD menu
memory card.
NOT ENOUGH SPACE IN MEMORY CARD.
DELETE UNDESIRED FILES, AND TRY AGAIN.
Quits card operation menu.
Stores current settings.
Stores image data.
CONFIGURATION
CONFIGURATION
File type
1/1 PREV PAGE NEXT PAGE
Page no.
Selects page