Programming The User Menu - Furuno FSV-24 Operator's Manual

7. CUSTOMIZING THE EQUIPMENT
7.1.2

Programming the user menu

The procedure below shows you how to add the menu item PRESENTATION
MODE (for selecting presentation mode) to the user menu. Not all menu items
may be programmed to the user menu. See the menu tree on page M-1 to M-4
for items which can be programmed. The order of items in the USER menu
cannot be changed.
1. Press the [MENU] key to open the main menu.
2. Select OTHERS and press the [MENU] key.
3. Select DISPLAY SETTING and press the [MENU] key.
4. Select PRESENTATION MODE and press the [MENU] key for more than one
second. The dialog box appears.
5. After the dialog box disappears the following message appears.
7-2
MENU
OTHERS
DISPLAY SETTING
DISPLAY MODE...
MODE SELECTION
PRESENTATION MODE : HEAD UP
TM DISPLAY RANGE
BEARING REF
H-SLICE WIDTH
H-SLICE PICT ADVC
NET COURSE MARK
MANUAL DEGAUSS
AUTO DEGAUSS
DIMMER
KEY BEEP VOLUME
Figure 7-3 DISPLAY SETTING menu
Figure 7-4 Presentation mode dialog box.
USER MENU REGISTRATION
SELECTED ITEM WILL BE
REGISTERED IN MAIN MENU.
Figure 7-5 Message for registration of user menu item
QUIT
QUIT
QUIT
: MODE KEY
: 1.6R
: SHIP HEADING
: 16
: KP SYNC
: ENTER
: EXECUTE
: INT SENSOR
: 10
: 5
QUIT
CANCEL
HEAD UP
NORTH UP
COURSE UP
TRUE MOTION
YES
NO