Executing A Function - Furuno FSV-24 Operator's Manual

7. CUSTOMIZING THE EQUIPMENT
7.2.1

Executing a function

1. Press desired function key. An appropriate dialog box appears.
2. Press the same function key again within five seconds to execute function.
(The function dialog box is automatically erased after five seconds.)
Example default function programs
F1: Storing picture
1. Press the [F1] key to save the current picture.
F2: Recalling picture
1. Press the [F2] key to recall the picture stored in the memory.
Note: If a picture is not stored, the message "Warning! The picture is not
F3: Presentation mode
Use the [F3] key to select presentation mode.
7-4
OVERWRITE PREVIOUS PICTURE
SAVED. PRESS THE KEY AGAIN TO
PROCEED.
COMPLETE TO SAVE THE PICTURE.
Figure 7-7 Function dialog box for storing picture
PRESS FUNCTION KEY AGAIN TO CANCEL.
Figure 7-8 Function dialog box for recalling picture
stored" appears.
<<PRESENTATION MODE>>
HEAD UP NORTH UP COURSE UP TRUE MOTION
Figure 7-9 Dialog box for selection of presentation mode
<<PICTURE SHOT>>
Press [F1] key.
<<PICTURE SHOT>>
<<PLAYBACK MODE>>