Introduction; Safety; Symbols Used - BAC EASYBOND MK2 Operation And Maintenance Manual

EASYBOND MKII PIN BRAZING UNIT
1.

INTRODUCTION

Thank you for choosing the Easybond MKII Pin Brazing Unit, if operated and maintained as
recommended your Easybond MKII should give you many years of reliable use.
Pin brazing is an easy, metallurgically safe method of making electrical connections to steel and
ductile iron pipelines, as well as other metallic substrate that are to be cathodically protected,
electrically earthed or electrically bonded.
The Easybond MKII is designed for the onsite user who needs a portable, simple to use,
reliable, rugged and easily maintained machine to make electrical connections onto metallic
structures.
It is important that you carefully read and understand this manual and
take time to watch the training video supplied with your equipment prior
to operating the Easybond MKII equipment.
2.

SAFETY

2.1

SYMBOLS USED

Read all manuals before using equipment
Wear overalls during operation
Wear safety boots during operation
An exposed surface is very hot and therefore dangerous
Wear safety gloves during operation
Wear eye protection during operation
Wear dust mask during operation
Wear ear defenders during operation
Observe the instructions in the text or graphic opposite
Worn out electrical products that should be sorted for recycling
Possible dangerous situation that could cause severe or fatal injury
BAC Document Number: Easybond MKII Manual V03 28/08/13 Page 4 of 32