Top Controls And Indicators - Canon LV-X2 Owner's Manual

BEFORE OPERATION
POWER ON–OFF BUTTON
Used to turn the projector
on or off. (P19)
INPUT BUTTON
Used to select input
source. (P22, 30)
MENU BUTTON
Used to open or close
MENU operation. (P17,
18)
KEYSTONE BUTTON
Used to correct
keystone distortion.
(P20, 35)
SET BUTTON
Used to execute the
item selected. It is also
used to expand
compress the image in
DIGITAL ZOOM mode.
(P29)
16

TOP CONTROLS AND INDICATORS

POWER
INPUT
MENU
VOL
–
KEY
STONE
SET
/
POINT (VOLUME + / – ) BUTTONS
Used to select an item or adjust
value in ON-SCREEN MENU. They
are also used to the image in
DIGITAL ZOOM mode. (P29)
+/–
POINT LEFT/RIGHT buttons are
also used as VOLUME +/– buttons.
VOL
+
READY
LAMP
REPLACE
WARNING
LAMP
TEMP.
WARNING TEMP. INDICATOR
Flashes
internal
temperature is too
high. (P39)
READY INDICATOR
Lights green when the
projector is ready to be
turned on.
flashes green in Power
Management mode.
(P36)
LAMP REPLACE INDICATOR
Turns to yellow when
the life of the projection
lamp draws to an end.
(P37)
LAMP INDICATOR
red when Becomes dim when the
projector projector is turned on.
And bright when the
projector is in stand-by
mode.
And it