Installation; Positioning The Projector; Adjustable Feet - Canon LV-8320 User Manual

For projector positioning, see the figures below. The projector should be set perpendicularly to the
plane of the screen.
Note:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting
in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
8.3' (2.54 m)
2.4' (0.74 m)
30
A:B = 49:1
Screen Size
(W x H) mm
16:10 aspect ratio
Zoom (max)
Zoom (min)
Projection angle can be adjusted up to 12.0
degrees with the adjustable feet.
Lift the front of the projector and press the feet
lock latches on both side of the projector.
Release the feet lock latches to lock the
adjustable feet and rotate the adjustable feet to
a proper height and tilt.
Keystone distortion can be adjusted
automatically with the Auto setup function or
manually by using the remote control or the
menu operation (see pages 25, 37, 45).

Installation

Positioning the Projector
25.2' (7.67 m)
16.8' (5.10 m)
12.5' (3.82 m)
150
100
93
62
30" 100"
646 x 404 2154 x 1346
' '
2.4 (0.74 m) 8.3 (2.54 m)
' '
4.0 (1.21 m) 13.5 (4.11 m)
Adjustable Feet
40.6' (12.38 m)
300
200
186
124
150"
3231 x 2019 4308 x 2692
12.5'(3.82 m) 16.8'(5.10 m) 25.2'(7.67 m)
20.3'(6.18 m) 27.1'(8.25 m) 40.6'(12.38 m)

Adjustable Feet

200" 300"
6462 x 4039
Feet Lock Latches
15