Positioning Projector; Adjustable Feet - Canon LV-X1 Owner's Manual

Canon multimedia projector lv-x1 owner's manual
Hide thumbs Also See for LV-X1:
Table of Contents

Advertisement

This projector is designed to project on a flat projection surface.
The projector can be focused from 5.3'(1.6m) ~ 26.6'(8.1m).
Refer to the figure below to adjust a screen size.
Screen Size
(W x H) mm
Height (H1)
19.4"(492mm)
Height (H2)
Picture tilt and projection angle can be adjusted by rotating
ADJUSTABLE FEET. Projection angle can be adjusted to 10.7
degrees.
1
Lift the front of a projector and pull FEET LOCK LATCHES
on the both sides of a projector.
2
Release FEET LOCK LATCHES to lock ADJUSTABLE FEET
and rotate ADJUSTABLE FEET to adjust position and tilt.
3
To retract ADJUSTABLE FEET, lift the front of a projector
and pull and undo FEET LOCK LATCHES.
Keystone distortion of a projected image can be adjusted by
Menu Operation. (Refer to P20 and 35.)
CAUTION
Avoid positioning a projector with the angle of more than 20
degrees. Projection Lamp may malfunction.

POSITIONING PROJECTOR

13.1' (4.0m)
5.3' (1.6m)
40"
34"
34"
40"
691 x 518
813 x 610
22.8"(579mm)
1.0"(26mm)
1.2"(30mm)

ADJUSTABLE FEET

ROOM LIGHT
The brightness in a room has a great influence on
picture quality. It is recommended to limit
ambient lighting in order to provide the best
image.
20.0' (6.1m)
150"
100"
123"
83"
100"
150"
2032 x 1524
3048 x 2286
57"(1448mm)
85.5"(2172mm)
3"(76mm)
4.5"(114mm)
ADJUSTABLE FEET
PREPARATION
26.6' (8.1m)
200"
Max. Zoom
166"
Min. Zoom
H1
H2
200"
4064 x 3048
114"(2896mm)
6"(152mm)
FEET LOCK
LATCHES
9

Advertisement

Table of Contents
loading

Table of Contents