Sony BPU4500A Operation Manual page 45

Page name Item
Page No.
<IP ADDRESS 2> PORT
N03
DHCP
(When the SKC-4001 is
installed)
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY 0.0.0.0 to 255.255.255.255
MAC ADDRESS
LINK SPEED
25G FEC
<NETWORK GENLOCK> PORT
N04
PROFILE
(When the SKC-4001 is
installed)
LOCK STATUS
Set value
LAN1, LAN2, LAN3, LAN4
OFF
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
xx:xx:xx:xx:xx:xx
25G, -----
NONE, RS-FEC (CL108),
FC-FEC (CL74)
LAN1, LAN2
ST2059-2
DOMAIN 0 to 127, 127
NUMBER
COMMUNICATION MULTICAST MODE,
MIXED MODE
DELAY –7 to –1
REQUEST
INTERVAL
PTP MASTER
INFO
IP ADDRESS 0.0.0.0 to 255.255.255.255
SYNC –7 to –1
INTERVAL
PRIORITY 0 to 255
STEP ONE-STEP, TWO-STEP
NOT IN USE, NO MASTER,
LOCKING, LOCKED
Description
Selects the network interface to configure/display.
Sets DHCP operation. Fixed to OFF in the current
version.
Sets and displays the IP address for the selected
network interface.
Sets and displays the subnet mask for the selected
network interface.
Sets and displays the default gateway IP address for
the selected network interface.
Specified MAC address of the selected network
interface (display only)
Displays the link speed.
Sets the FEC mode for 25G.
Note
Set to the port setting of the IP switch to be
connected.
Selects the port of the SKC-4001 for setting
NETWORK GENLOCK.
Displays the supported protocol. Only the ST2059-2
profile is supported.
Sets the domain number.
Note
Set to the domain number of the master device to be
connected.
MULTICAST MODE: Multicast reply to the master.
MIXED MODE: Unicast reply to the master.
Displays the delay of the response to the PTP master.
Displays information obtained from the PTP master.
Displays the IP address of the currently synchronized
PTP master device.
Displays the Sync Interval setting of the master
device.
Displays the priority of the PTP master. The lower the
number, the higher the priority.
Displays the mode in which the time stamp is sent.
ONE-STEP: Sent in Sync message.
TWO-STEP: Sent in Follow-up message.
Displays the PTP operation status.
NOT IN USE: PTP operation stopped
NO MASTER: PTP master is not found.
LOCKING: Synchronizing
LOCKED: Synchronized
45