Table of Contents
Advertisement
Page name
Item
Page No.
<CHU MODE>
CURRENT
C07
<TRANSMIT>
CCU TRANSMIT
C08
CHU TRANSMIT
CAM OPTICAL
SIGNAL
<OTHERS>
ASSIGNABLE
SWITCH
C09
HD DOWNCONV
FILTER
CHARACTER LEVEL 1 to 5
2× MODE (HD)
CLEAR BPU
SETTINGS
RETURN VF
CHANNEL MARKER
HDR NORMAL
SPEED OUT
HDR LOOK
SELECTION
<OPTION KEY>
READ (USBtCAM)
C10
INSTALLED OPTION
Set value
PMW-F55, F65(1×), F65(2×),
HDC4300/HDC-P43
PMW-F55
ENTER to execute
F65(1×)
ENTER to execute
F65(2×)
ENTER to execute
HDC4300/
ENTER to execute
HDC-P43
HIGH BIT RATE, HD-SDI
NORMAL
OFF, ON
OFF, BPU BARS
1 to 4, 1(V:0.3), 1(V:0.6)
0 (SRMASTER), 1 (EVS)
ENTER to execute
NORMAL, HFR LINK
OFF, ON
OFF, ON
SYSTEM, EACH SLOT
ENTER to execute
Description
Currently selected camera head setting
Sets camera head setting to PMW-F55.
Sets camera head setting to F65 (normal speed).
Sets camera head setting to F65 (2× frame rate).
Enabled only when the SZC-4002 is installed.
Sets camera head setting to HDC4300 or HDC-P43.
Sets the type of CCU connected.
HIGH BIT RATE: CCU that supports high bit rate.
HD-SDI: CCU that does not support high bit rate.
CCUs with 1.5 Gbps optical transmission are not
supported.
Transfer method of connected camera (display only)
Sets optical transfer with the camera in an extension
mode connection (available only when HDC-P43 is
connected)
Assignable button function select
4K video signal to HD signal down-converter filter
type
Menu character contrast level
Selects the output mode for 2× HD video (SLOT3).
0 (SRMASTER): Compatible with the SR-R1000.
1 (EVS): Compatible with servers manufactured by
EVS.
SR-R1000/PWS-4400/PWS-4500 support both the 0
and 1 settings.
Displayed only when the format is 4K HFR.
Reset to factory default settings
Sets the VF return signal to the camera.
NORMAL: Normal-speed signal
HFR LINK: HFR signal 1LINK (steady image can be
used as the image to display in the viewfinder)
Displays markers that identify each channel for HFR
video signals output from the SDI output connectors
of 8 channels (max).
HDR standard video output function on/off setting for
SDI OUT 7 to 8 connectors of SLOT2
Enabled only when both shooting in HD HFR (2× to
6×) with HDC4300 connected and with HDR output
enabled
Sets whether to enable separate LOOK settings for
SLOT1 and SLOT2.
When EACH SLOT is selected, separate LOOK
settings can be set on the <OUTPUT FORMAT>
page.
Read the install key from a USB flash drive.
List of installed options (display only)
42
Advertisement
Table of Contents
