Sony BPU4500A Operation Manual page 44

Page name Item
Page No.
<CNS SETTINGS> CNS MODE
N02
SET
(Not available when a CCU
is connected.)
<NETWORKED MEDIA NETWORK
INTERFACE> INTERFACE
N03
(When the SKC-IP45AF is
installed)
<IP LIVE> IP LIVE SYSTEM
MANAGER
N04
(When the SKC-IP45AF is
installed)
Set value
LEGACY, BRIDGE
ENTER to execute.
SLOT1 NMI LAN1, SLOT1 NMI
LAN2, SLOT2 NMI LAN1, SLOT2
NMI LAN2, SLOT3/4 NMI LAN1,
SLOT3/4 NMI LAN2
DHCP OFF, ON
IP ADDRESS 0.0.0.0 to 255.255.255.255
SUBNET MASK 0.0.0.0 to 255.255.255.255
DEFAULT 0.0.0.0 to 255.255.255.255
GATEWAY
MAC ADDRESS xx:xx:xx:xx:xx:xx
NETWORK NMI LAN1, NMI LAN2
INTERFACE
CONNECTION DISABLE, ENABLE
DHCP OFF, ON
LSM IP 0.0.0.0 to 255.255.255.255
ADDRESS
CONNECTION
STATUS
SLOT1 DISCONNECTED,
CONNECTING, CONNECTED
SLOT2 DISCONNECTED,
CONNECTING, CONNECTED
SLOT3/4 DISCONNECTED,
CONNECTING, CONNECTED
Description
Sets the communication mode.
Selects the network interface to configure/display.
Enables or disables DHCP.
When DHCP enabled: Displays the IP address
assigned using DHCP for the selected network
interface.
When DHCP disabled: Sets and displays the IP
address for the selected network interface.
When DHCP enabled: Displays the subnet mask set
using DHCP for the selected network interface.
When DHCP disabled: Sets and displays the subnet
mask for the selected network interface.
When DHCP enabled: Displays the default gateway
IP address set using DHCP for the selected network
interface.
When DHCP disabled: Sets and displays the default
gateway IP address for the selected network
interface.
Specified MAC address of the selected network
interface (display only)
Selects the network interface to configure/display.
Sets whether to connect the IP Live System Manager
(LSM) for the selected network interface.
Sets whether to set the LSM IP address using DHCP
or to set it manually.
ON: Sets the LSM IP address using DHCP.
OFF: Sets the LSM IP address manually.
Set to OFF (fixed) when DHCP is set to OFF on the
<NETWORKED MEDIA INTERFACE> page.
Sets the IP address of the LSM. The setting is applied
when SET is executed. Disabled when DHCP is set to
ON.
Displays the LSM connection status for the selected
network interface of SLOT1.
Displays the LSM connection status for the selected
network interface of SLOT2.
Displays the LSM connection status for the selected
network interface of SLOT3/4.
44