Checking The Remaining Recordable Time - Sony MZ-N707 Operating Instructions Manual

Notes
• If you press x during recording operation, the
recorder will revert to automatic recording
level adjustment mode the next time you start
a recording operation.
• To set the recording level manually during
synchro-recording, do the procedure below.
1 Select "SYNC OFF" in step 3 of "Record an
MD." (page 17).
2 Do steps 1 to 4 of manual recording
procedure. Then do steps 2 and 3, and select
"SYNC ON" in the synchro-recording
procedure (page 17).
Recording starts automatically whenever the
source sound is played.
• You cannot switch from "Auto REC" to
"ManualREC" (or vice-versa) during
recording.
Checking the remaining
recordable time
You can check the remaining time, track
number, etc. when recording or during
stop. Group-related items appear only
when a track with group settings is played
and then stopped.
ENTER/
./>
On the recorder
1
Press MENU.
2
Press . or > repeatedly until
"DISPLAY" flashes in the display,
and then press ENTER.
3
Press . or > repeatedly until
the information you want flashes in
the display.
Each time you press >, the display
changes as follows:
MENU
DISPLAY
continued
33
-GB