To Adjust The Sound Quality (Digital Sound Preset); Selecting The Sound Quality - Sony MZ-N707 Operating Instructions Manual

2
Press . or > repeatedly to
select a track and then press ENTER.
The selected track enters.
3
Repeat step 2 to program more tracks.
4
Press ENTER for 2 seconds or more.
The program is set and the playback
starts from the first track.
On the remote control
1
While the recorder is playing, press
PLAY MODE repeatedly until
"PGM " flashes in the display.
2
Turn the control repeatedly to select a
track number, and then press RPT/
ENT to enter a track number.
Track Program number
number
3
Repeat step 2 to program more tracks.
4
Press RPT/ENT for 2 seconds or
more.
The program is set and the playback
starts from the first track.
z
• The program play setting will be remain in
memory even after playback finished or is
stopped.
• You can specify play mode for a selected
group when group mode is on. To activate
group mode, see "Listening to tracks in a
specific group (Group Mode Playback)"
(page 35).
• Play mode can also be selected when the
recorder is stopped.
Notes
• All program settings are lost when the lid of
the recorder is opened.
• If the recorder is stopped and left inactive for
5 minutes in the middle of a programming
operation, the tracks selected up to that point
are entered as the program.
• If you turn group mode on or off while setting
a program, the program setting mode will be
canceled but the program you set up to that
point will remain.
• If you turn group mode on during program
play, the program setting is canceled.
To adjust the sound
quality (Digital Sound
Preset)
You can make adjustments to the sound
quality to suit your taste, and then store
two sets of these adjustments.
ENTER/./
>/x/
X
Control

Selecting the sound quality

Factory settings of the Digital
Sound Preset
Factory settings of the Digital Sound
Preset are as follows:
• "SOUND 1": bass +1, treble ±0
• "SOUND 2": bass +3, treble ±0
MENU
SOUND
x
39
-GB