Checking The Remaining Recordable Time - Sony MZ-N505 Operating Instructions Manual

Checking the remaining
recordable time
You can check the remaining time, track
number, etc. when recording or during
stop. Group-related items appear only
when a track with group settings is played
and then stopped.
MENU/
ENTER
1
While the recorder is recording or
stopped, press MENU.
2
Press I44 or ))I repeatedly until
"DISP" flashes in the display, and
then press ENTER again.
3
Press I44 or H repeatedly until
the information you want flashes in
the display.
Each time you press H, the display
changes as follows:
Display window on the recorder
On 0
r
LapTim
The elapsed time of the current
track.
1
RecRem
The remaining recordable time.
I
I
Glbem
1
The remaining time after the current
track in a group.
1
AllRem
The remaining time after the current
location.
Note
Items may not be selectable depending on
group mode's on/off' status or the recorder's
operating status.
4 Press ENTER.
The information selected in step 3
appears in @ and 0.
@ - the information selected in step
& - track number, track name,
group name, or disc name.
Note
Items may appear differently depending on
group mode's on/off
status,
the recorder's
operating status, or the recorder settings.
."'.
c
If you want to check the playing position or
track name while playing, see page 36.
32-68