Registering Tracks Or Groups As A New Group (Group Setting) - Sony MZ-N707 Operating Instructions Manual

On the remote control
1 Insert a disc and do the following operations:
To relabel a track
Start playing a track you want to relabel, and
change a track name while playing or
recording operation.
To relabel a group
Turn group mode on (page 28) and start
playing the track within the group you want
to relabel or start recording a track to the
group, and change the group name during the
playback or recording operation.
To relabel a disc
If a disc is already recorded, follow the
procedures from step 2 while the recorder is
stopped.
If you relabel a disc with group settings, turn
group mode on (page 28).
2
2 Follow steps
control" (page 44) in "Labeling recordings"
to display a track, group, or disc name.
5
3 Follow steps
control" (page 44) in "Labeling recordings".
4 Keep pressing ENTER for 2 seconds or
more.
Notes
• You cannot relabel premastered MDs or label
MDs that have not been recorded.
• The recorder is able to display, but cannot
label using Japanese "Katakana" characters.
• The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device.
To cancel labeling
• On the recorder
Press CANCEL in step 3.
• On the remote control
Press DISPLAY for 2 seconds or more
in step 3.
46
-GB
4
to of "On the remote
7
to of "On the remote
Registering tracks or
groups as a new group
(Group Setting)
Do the following procedure to register
tracks or groups as a new group. The
tracks or groups must, however, be
sequential. If the desired tracks or groups
are not consecutive, you must move them
to make them consecutive before you can
register them ("Moving recorded tracks",
page 49). The operation of this function
depends on whether group mode is on or
off.
• When group mode is ON:
Several groups are registered as one
group.
• When group mode is OFF:
Several tracks are registered as one
group.
The following section explains the
operation when group mode is on.
1 2 3 4 5 6 7 8 9
Making a new
group with
tracks 1 to 3.
Group
1 2 3 4 5 6 7 8 9
• Registration of non-consecutive tracks
is not possible (for example, track 3
cannot be registered into a group with
track 5 to 7).
• Tracks always appear according to their
order on the disc, not their order within
the group (even when group mode is on)
• Insert a disc.
Group
Group
Making a new group
with 2 groups.
Group