Checking The Remaining Recordable Time - Sony MZ-N707 Operating Instructions Manual

Checking the remaining
recordable time
You can check the remaining time, track
number, etc. when recording or during
stop. Group-related items appear only
when a track with group settings is played
and then stopped.
When you operate the recorder with the
supplied remote control, use the buttons
and controls shown in parentheses.
MENU
EDIT
1
While the recorder is recording or
stopped, press MENU (EDIT for 2
seconds or more).
2
li Press I44 or H (flip the lever
towards - or -) repeatedly
until "DISPLAY" flashes in the
display, and then press ENTER
(ENTER) again.
3
Press I44 or FFi (flip the lever
towards 1 or --L) repeatedly
until the information you want flashes
in the display.
Each time you press H (flip the
lever towards -L), the display
changes as follows:
Display window on the recorder
On 0
LapTime
The elapsed time of the current
track.
1
RecRemain
The remaining recordable time.
1
GP Remain
The remaining time after the current
track in a group.
1
AllRemain
The remaining time after the current
location.
Note
Items may not be selectable depending on
group mode's on/of status or the recorder's
operating status.
4
Press ENTER (ENTER).
The information selected in step 3
appears in @ and 0.
o-
track number, track name,
group name, or disc name.
0 - the information selected in step
3.
Note
Items may appear differently depending on
group mode's
on/off status,
the recorder's
operating status, or the recorder settings.
."'.
6
If you want to check the playing position or
track name while playing, see page 40.
35-GB