Erasing Tracks; To Erase A Track - Sony MZ-N707 Operating Instructions Manual

2
Find the track mark by pressing .
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. "00:00" appears in the display.
"MARK" appears in the display for 2
seconds.
3
Press T MARK to erase the mark.
"MARK OFF" appears in the display.
The track mark is erased and the two
tracks are combined.
z
When you erase a track mark, name assigned to
the mark is also erased.
Notes
• When you erase a track mark between the two
consecutive tracks that are registered into
different groups while group mode is off, the
second track is re-registered into the group
containing the first track. In addition, if you
combine a track that is registered to a group
with a track that is not registered to a group
(two consecutive tracks), the second track
takes the same registration setting as the first
track. However, when group mode is on, you
can only combine tracks within the selected
group.
• You cannot erase track marks according to the
system limitations. For details, see "System
limitations" (page 63).

Erasing tracks

Note
You can not erase tracks that have been checked
out from your computer. You can not erase a
group or an entire disc if it contains a checked-
out track. In this case, check in the track or
tracks to OpenMG Jukebox.
ENTER/./>
CANCEL
DISPLAY
Control

To erase a track

Note that once a recording has
been erased, you cannot retrieve it.
Make sure of the track you are
erasing.
On the recorder
1
While playing the track you want to
erase, press MENU.
2
Press . or > repeatedly until
"EDIT" flashes in the display, and
then press ENTER again.
" : Name" flashes in the display,
and the recorder plays the selected
track repeatedly.
MENU
x
continued
53
-GB