Sleep Function; Clock Setting - Tecsun R-108 Operation Manual

2. Press & hold
until you hear a sound of "Be--";
3. Press the [DELETE] button at anytime in auto browse to direct
delete the unwanted
the next available station until you press any other button to stop
this function.
Note: This function is especially suitable for organizing store memory.
METHOD 3: MANUAL DELETES ALL MEMORY WITHIN
THE BAND
Press the [VM/VF] button until "PRESET " flashing
1.
2. Press & hold the
"ALL DEL" appears on the upper right corner of the display;
3. Press the [DELETE] button to delete all memory within the
selected band.
Note：If you do not press the [DELETE] button for 3 seconds to
confirm, the radio will automatically exit the delete operation.

►SLEEP FUNCTION

The radio is turned on by default to "120" (120 minutes), you
can adjust the auto power off time as needed;
1.Press& hold [POWER]button until "
2. Rotate the [TUNING] knob immediately to select sleep timer from
1 ~ 120 minutes or select permanently "ON ";
3. Then wait until the radio auto turn on to confirm the setting.

►CLOCK SETTING

Set local time
1. Press & hold the [TIME] button until hours flashing, then rotate
the [TUNING] knob to adjust the hour;
2. Press the [TIME] button, then rotate the [TUNING] knob to
adjust the minutes while minutes is flashing;
/ button to auto browse those stored stations
station; the radio will keep on auto browsing
[DELETE]
button for 3 seconds and notice
12
www.tecsunradios.com.au
" flashing on the display；
to