Manually Storing Station; Semi-Auto Storing Station; Delete Memory; Manual Delete Memory - Tecsun PL-360 Operation Manual

Method 2:

MANUALLY STORING STATION

1. Tune to your desired station, press the [MEM.] button
once and notice the PRESET number flashing in the
upper right corner of the display.
2. While it flashing, press the [MEM.] button to store it into
the memory or wait for 3 seconds to store it automatically.
If you want to store it into another PRESET memory, just
rotate the tuning knob of your choice, and press the [M]
button to confirm.
Method 3:

SEMI-AUTO STORING STATION

1. Short press the [VF] button to enter frequency status.
2. Long press [VF] button to activate the Auto-browse
function.
3. While tuning to your favor station, you can direct store it
into the next available memory by pressing on the [MEM.]
button with PRESET flashing. The Auto frequency
browsing keeps on going unless you short press the [VF]
button again.

DELETE MEMORY

Method 1:

MANUAL DELETE MEMORY

1. Turn on the radio and press the [VM] button causing
PRESET stations appears in the display's upper right
corner.
2. Rotate the [TUNING] knob to select the memory that you
want to delete.
3. Long press [DEL.] button with "
display, press the [DEL.] button again to confirm.
Note: If " " is flashing more than 3 seconds without
confirmation, it will exit the delete function automatically.
10
" flashing in the
Method 2:

SEMI AUTO-DELETE MEMORY

In VM mode, long press the [VM] button to activate the
Auto-Browse function of memory. Once previewing your
unwanted station, simply press the [DEL.] button with
" " shows for 2 seconds and then keep on browsing
other stations. To stop the browsing function, short press
the [VM] button to exist.
Method 3: DELETE ALL MEMORY
Short press the [VM] button to
enter VM / Memory mode, long
press the [DEL.] button for
3 seconds with " " shows on
the upper right corner of the
display, press again the
[DEL.] button to remove all
memory.
Note: If " " is flashing more than 3 seconds without
confirmation, it will exit the delete function automatically.

SLEEP FUNCTION

With sleep function, you can adjust the length of time for
the radio to turn off automatically.
The default setting for the auto-turn off time is 30 minutes if
the radio being turned on by short pressing the [POWER]
button.
To change the sleep timer, long press the [POWER] button
with [ON / 01~120] & [SLEEP] appear on the display, rotate
the [TUNING] knob to select sleep timer from 1 ~ 120
minutes or permanently "
" " symbol stops flashing to confirm.
SLEEP
Note: Short press the [POWER] button to directly turn on
the radio with previous preset sleep timer; long press it to
change the timer.
11
flashing
SLEEP
Delete all memories
" Wait for 3 seconds until