Delete All Memory; Sleep Function - Tecsun PL-365 Operation Manual

TECSUN RADIOS AUSTRALIA
Method 2: SEMI AUTO-DELETE MEMORY
Press the [VF/VM] button to enter the memory mode,
then press & hold the [VF/VM] button to activate the
memory auto-browse function. During the browsing
process unwanted stations can be deleted by pressing
the [DEL.] button. Press the [VF/VM] button again to
stop browsing.
Method 3:
Press the [VF/VM] button to
enter the memory mode, then
press & hold the [DEL.] button
until "
display, press the [DEL.] button
again to confirm.
Note: If the [DEL.] button is not pressed within 2 seconds
to confirm, the delete function is automatically exited.

SLEEP FUNCTION

1. In POWER OFF mode, press &
hold the [POWER] button untill
the sleep timer symbol "
flashes on the display.
2. Rotate the [TUNING] knob
immediately to select a sleep
timer from 1 - 120 minutes or
select "
mode (the radio will be turned
on after 1 second).
Note: The default setting of the sleep timer is "
24/9 Powells Road, Brookvale, NSW 2100 Australia
Email: info@tecsunradios.com.au

DELETE ALL MEMORY

" appears on the
" for POWER ON
SLEEP
Delete all memories
flashing
SLEEP
"
SLEEP
Sleep time range
11
Ph: +61 2 9939 4377
Ph: +61 2 9939 4377
www.tecsunradios.com.au
www.tecsunradios.com.au
flashing
".
Ph: +61 2 9939 4377
www.tecsunradios.com.au