How To Change The Display Mode - Tecsun R-108 Operation Manual

3. When the alarm by radio preset on time is reached, the radio
will automatically turn on and play the pre-stored stations. It will
automatically shut down when the preset off time is reached.
Note: The radio will turn on automatically playing the preset station
when it reaches the alarm time. If the preset alarm is activated
when you are listening to the radio, it will auto switch to the preset
radio station.
METHOD2: SET THE ALARM BY BUZZER
（It is recommended to set the alarm by buzzer if you are not familiar
with the local radio frequency and air time.）
1. Press the [ALARM] button with "
by buzzer.
2. The radio will turn on a continuous sound of "BB" when it
reaches the alarm time. It will auto turn off as well when it reaches
the preset alarm off time.
SNOOZE FUNCTION
When the preset alarm is activated, you can press any button other
than the power button to temporarily turn off the alarm and the radio
will start alarming again 5 minutes later.
Notes： ：
1. Press the [POWER] button to turn off the radio when Radio
alarm is turned on.
2. Press the [POWER] button to turn off the Buzzer alarm when it
is turned on.

►HOW TO CHANGE THE DISPLAY MODE

With radio OFF: Repeat pressing the [DISPLAY] button to view
temperature, home/world time or alarm time showing on the
upper right corner of the display.
" flashing to turn on
14
www.tecsunradios.com.au
the alarm