Squelch Function; Tuning Speed Setting - Tecsun R-108 Operation Manual

► SQUELCH FUNCTION

1. Press the [POWER] button to turn on the radio and select your
desired band by pressing [BAND] button；
2. Press & hold the [SQUELCH] button until "B" sound heard to switch
to the signal strength selection page with a symbol" "in display；
3. Rotate the [TUNING] knob to select signal strength"OFF-1-2-3-4-
5-6-7-8-9"；
4. Press the [SQUELCH] button again to confirm.
Note: If the [SQUELCH] button is not pressed shortly within 3
seconds, the radio will automatically confirm the adjustment; OFF
means turn off the squelch function; the higher the number, the
higher the signal strength needed to turn the sound on.

►TUNING SPEED SETTING

1. Turn on the radio and select any band you desired；
2. Press the [SQUELCH] button until you hear a sound of "B" and
release your hand. The corresponding reference table of" " "
" " " is shown below.
17
www.tecsunradios.com.au