Advertisement
A variable displacement pump (A) is shown by an arrow
drawn through the pump symbol at a 45 degree angle. A
variable displacement, pressure compensated pump (B)
is shown by a small box with an arrow, added to the side
of the pump symbol.
If the pump is controlled by a lever (A) or a pedal (B), the
appropriate symbol is added to the side of the pump.
A drive shaft is shown as two short parallel lines extending
from the side of the pump. A curved arrow, if present, on
the drive shaft indicates the direction of rotation.
Motors
Motor symbols are circles with solid black arrows, which
point in the opposite direction of a pump's arrow, to show
the motor as a receiver of fluid. One arrow is used for
non-reversible motors (A); and two arrows are used for
reversible motors (B).
A simple schematic diagram is shown of a hydraulic motor
(A) connected to a hydraulic pump (B).
Hydraulic systems - Hydraulic systems
73383738 15/09/2017
35.1 [35.000] / 6
15
RCIL07CCH040AAA
16
RCIL07CCH041AAA
17
RCIL07CCH049AAA
18
RCIL07CCH051AAA
19
RCIL07CCH046AAA
Advertisement
