Discount Car Stereo A2DIY-CDR30 Quick Start Installation Manual

For porsche cdr30/31 radios

Advertisement

Quick Links

Courtesy of: DiscountCarStereo.com
Serving the internet community since 1995
A2DIY-CDR30
QUICK START BLUETOOTH INSTALLATION GUIDE FOR PORSCHE CDR30/31 RADIOS
C reated N ovem ber 3, 2019
R evised: October 27, 2020

Advertisement

Table of Contents
loading

Summary of Contents for Discount Car Stereo A2DIY-CDR30

  • Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 A2DIY-CDR30 QUICK START BLUETOOTH INSTALLATION GUIDE FOR PORSCHE CDR30/31 RADIOS C reated N ovem ber 3, 2019 R evised: October 27, 2020...
  • Page 2: Installation

    Tip: These plugs are keyed to which ensures proper fitment. but may lag behind technology when it comes to audio systems. Those wanting support for more attractive modern media formats, we offer the A2DIY-CDR30. This kit is compatible with virtually all Bluetooth phones, and sounds great whether using for mobile conversations, streaming music or connecting audio device (e.g.
  • Page 3 Fig. 4 Accessory wire Fig. 6 audio cable Suggestions: 1. Left foot well Fuse box at Row C, Fuse 1 (7.5A/15A) 986, 981 2. Kick Panel Fuse box at Row B, Fuse 9 (7.5A) 987 3. Or remove hand-brake cover and tap the orange wire (See Fig. 5) Fig.
  • Page 4 Optional push button with built-in microphone: Select this option to replace standard visor microphone and separate push button shown in Fig. 7 and 8. –With this option, the microphone is built- into push button (See images below) which reduces installation and conveniently mounted to dashboard within driver reach.
  • Page 5 Optional USB charging port (not for thumb drives etc.) An optional Fast charging port can be added to the A2DIY-CDR30. Should you decide to add it we suggest one of 2 connecting options: A. Flush to dash/panel requires drilling a ¾” hole B.
  • Page 6: Bracket Mount

    Bracket Mount Smart remote (No drilling) Pairing smart remote: The included smart remote must be paired with Locate a flat surface at location of choice within 3.2 ft. of module to smartphone for media control functions (does not operate radio). mount USB support bracket (See Fig.
  • Page 7: Bluetooth Pairing

    Bluetooth Pairing: Test Operation: Pairing varies among devices but basic steps are the same. This process is Turn ignition and radio “ON” done upon initial install and will not have to be repeated. 2. Repeatedly press CD/AUX button on radio until “AUX Mode” is displayed.
  • Page 8: Frequent Asked Questions

    Email support@discountcarstereo.com © 1995-Oct-20 Discount Car Stereo, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Table of Contents