Fitting The Thermometer, Thermometer Sensor And Cover Strips - Viessmann VITOCELL 100-E Installation And Service Instructions Manual
Heating water buffer cylinder
Hide thumbs
Also See for VITOCELL 100-E:
Table of Contents
Advertisement
Installation sequence
Fitting the thermal insulation, type SVP
Fitting the thermometer, thermometer sensor and cover strips
2.
5.
Fig. 10
Type plate (self-adhesive)
A
Fit the thermal insulation jacket evenly around the cyl-
inder body by patting it.
14
(cont.)
7.
A
4.
6.
3.
1.
Note
Slide the thermometer sensor into the clamping
bracket at the upper base as far as possible and
tighten the wing nut.
Advertisement
Table of Contents
