Table of Contents
Advertisement
Install the Plumbing
1.
Install the drain in accordance with the manufacturer's instructions.
Caution! Make sure a watertight seal exists on all basin drain connections.
Caution! Provide access to the plumbing connections for future plumbing
maintenance.
2.
Connect the hot and cold water supplies.
3.
Open the hot and cold water valves, and check the supply connections
for leaks.
4.
Run water into the vessel, and check the drain connections for leaks.
Cleaning
Caution! Risk of product damage. Many cleaners contain abrasive and
chemical substances, and should not be used for cleaning stainless steel,
enamel, plated or plastic fittings. These finishes should be cleaned using
USER MAINTENANCE
P3998170
13
P3999
Advertisement
Table of Contents
