Table of Contents
Advertisement
Install the Vessel - Timpani
1.
Apply silicone sealant around the counter cutout hole.
2.
Carefully position the vessel into place over the counter cutout.
3.
Position the vessel so the "Kohler" logo is clearly visible at the back.
4.
Position the mounting ring holes over the vessel bolts.
5.
Securely hand tighten the wing nuts to ensure the vessel is level, but
do not overtighten.
Silicone
Sealant
Bolt
Mounting
Ring
Wing
Nut
9
P3999050
P3999
Advertisement
Table of Contents
