Table of Contents
Advertisement
Install the Vessel - All
Cut-out
Note!
The tap spout should be at least 205mm long for adequate
clearance into the vessel.
1.
Use the installation template to mark the outline for cutting.
2.
Position the template on the counter.
3.
Use a pencil to trace the outline on the counter.
4.
Using a suitable power tool, cut out the opening for the vessel.
5.
Temporarily position the vessel into the counter cutout and check for
fit.
6.
Remove the vessel from the counter cutout and carefully set aside.
7.
Install the taps in accordance with the manufacturer's instructions.
Line
Backsplash
Outside Edge
8
of Vessel
P3999040
P3999
Advertisement
Table of Contents
