New Holland W130D Service Manual page 59

58. Attach a suitable lifting straps to the Selective Cat-
alytic Reduction muffler (SCR) support structure. Re-
move the bolts securing the support structure at the
front (1) and rear (2) part of the structure.
Use a suitable lifting device and carefully lift the
support structure of the Selective Catalytic Reduction
muffler (SCR) from the machine.
NOTE: pay particular attention to the connection between
the SCR muffler and the Diesel Oxidation Catalyst (DOC).
59. Tag and disconnect the wire harness from the buzzer.
Remove the bolts (1) securing the front support struc-
ture of the SCR muffler and remove it.
NOTE: tilt the top of the structure away from the engine
(the rear structure just about has to be laid on the counter-
weight) to obtain clearance between its feet and the engine.
60. Tag and disconnect wire harness from primary fuel
filter.
61. Remove the DEF/A
cated on the right-hand side of the machine.
Engine - Engine and crankcase
B ® storage tank cover lo-
D LUE
51428248_EN 18/12/2017
10.1 [10.001] / 22
58
LEIL14WHL0404AB
59
LEIL16WHL1878AB
60
RAPH12WEL0068AA
61
LEIL13WHL0170AB