New Holland W130D Service Manual page 61

66. Attach suitable lifting straps to the support structure
(1) of the Diesel Oxidation Catalyst (DOC).he figure
beside does not show the supply module and the
coolant control valve for clarity.
NOTE: the figure beside does not show the supply module
and the coolant control valve for clarity.
67. Loosen the two hexagonal nuts of the sensors (3) and
(4) and disconnect the sensors (3) and (4).
Loosen the clamp (1) on the Diesel Oxidation Catalyst
(DOC) and disconnect the exhaust pipe (2) from the
Diesel Oxidation Catalyst (DOC).
68. Remove the SCR coolant supply line from the engine.
69. Remove the bolts that secure the support structure of
the Diesel Oxidation Catalyst (DOC).
Use a suitable lifting device and carefully lift the sup-
port structure of the Diesel Oxidation Catalyst (DOC)
(with SCR system components attached) from the ma-
chine.
Engine - Engine and crankcase
51428248_EN 18/12/2017
10.1 [10.001] / 24
66
LEIL14WHL0405AB
67
LEIL13WHL0229AA
68
LEIL15WHL0008AB
69
LEIL13WHL0173AB