LulzBot TAZ SideKick Quick Start Manual

START HERE START HERE
Unpacking Your LulzBot TAZ SideKick
a
With the box on a sturdy surface, carefully open the top of the
box, marked "OPEN HERE".
b
Remove the accessory bags from the packing material and set
aside for later use
.
c
Firmly grasp the printer frame, lift the printer and packing
foam straight up and out of the box.
d
Set the printer and packing foam upright on a sturdy surface.
e
While supporting the printer frame with one hand, pull the
packaging foam from both sides of the printer. Remove the
accessory box from the lower foam pocket and set aside for
later use.
f
Set the unpacked printer upright on a sturdy surface.
You are now ready to begin the quick process to assemble
your SideKick! Locate the SideKick User Guide PDF on the
included SD card or download the most up-to-date version at:
download.lulzbot.com/SideKick/Documents/SK_User_Guide.pdf
Questions? Contact Customer Support at Support@LulzBot.com or call 1-701-809-0800 ext 2
www.LulzBot.com
THANK YOU
FOR CHOOSING
LULZBOT
™
UNPACKING INSTRUCTIONS
!
RETAIN ALL PACKING MATERIALS.
In the case that warranty service
is needed, the SideKick 3D printer
MUST be shipped in it's original
packaging to ensure safe delivery.
Keep ALL packing materials that
came with your SideKick. The orange
shipping mounts/clips, packing foam,
and box.
Shipping the printer without using
the original packaging can result
in damage to the printer that is not
covered by the warranty, see
Chapter 15, Warranty & Support.
i
NOTE: The color and appearance
of some components may vary
depending on the configuration of
your SideKick.
!
IF YOUR SIDEKICK IS DAMAGED
OR IS NOT WORKING PROPERLY,
DO NOT RETURN TO THE STORE
OR RETAILER.
If you have an issue with your printer
or with the performance of this
product please contact LulzBot at:
Web: LulzBot.com/Support
Email: Support@LulzBot.com
Phone: +1-701-809-0800
i
For more details on quick assembly
and other printer information,
locate the SideKick Users Guide
PDF on the included SD card or
download the PDF at:
http://download.lulzbot.com/
SideKick/Documents/SK_User_
Guide.pdf
i
The standard tool kit or optional
deluxe tool kit will be located in the
accessories box with the filament
guide tube.
i
Before beginning the simple
assembly process, take a moment
to familiarize yourself with the key
components of your new SideKick
3D printer in Chapter 2, Meet Your
Sidekick.
v.1.0 7-08-21
®