PREVOST XL Series Manual page 7

1. Press and hold the "RESUME" switch until the
desired speed is obtained. Releasing the
"RESUME" switch will set the new higher speed.
2. Depress accelerator pedal until the desired
speed is obtained, then press and release the
"SET" switch.
NOTE:
When driving with cruise control in
operation, the speed may be increased for
passing, etc., by depressing the accelerator in the
usual manner. Once the foot is removed from the
accelerator pedal, the cruise control will return to
the set speed.
Decreasing set speed
Vehicle speed setting may be decreased by one
of the following methods:
1. Press and hold the "SET" switch until the
desired lower speed is obtained. Releasing the
"SET" switch will set the new speed.
2. The cruise control can be disengaged without
losing the speed memory by either of two
methods:
a) Lightly applying the brakes, or
b) momentarily depressing the "DECEL" switch
button.
After either of these disengagements, you may
return to the previously set speed by pressing and
releasing the "RESUME" switch, provided the
speed is higher than 20 m.p.h. (32 km/h).
The cruise control is completely shut off and the
speed memory is lost when turning off the
"CRUISE" rocker switch.
NOTE:
Cruise control is inoperative when speed
drops below 20 m.p.h. (32 km/h), therefore the
setting instructions must be repeated if vehicle
speed drops below this mark.
When the cruise control system is canceled,
objectionable vehicle motions are minimized by
lightly depressing accelerator, before disengaging
cruise control.
WARNING:
It is important to know that toggling
the "SET" or the "RESUME" switch will result in a
decrease or increase in speed (respectively) of
0.6 m.p.h. (1.0 km/h) for every touch.
2 - 6
CONTROLS/INSTRUMENTS