PREVOST XL Series Manual page 22

•
Overspeed time and percentage for two
(2) speed thresholds
•
Over-rev time and percentage
•
Maximum vehicle speed and RPM
•
Coasting time and percentage
•
Automated oil change interval tracking
•
Hard braking incident records
•
Driver initiated incident records
•
Stop and check engine code logs.
•
Optimized Idle
and estimated fuel savings
•
J1587 data link timeouts and power
interruptions
•
Leg time, miles, fuel used, fuel economy,
average speed, and cruise time and
percentage
•
Accident Incident Records.
tm
ProDriver - Quick Reference
NOTE:
The following information is only for
reference and does not attempt to teach how to
tm
operate the ProDriver
tm
Diesel ProDriver User Manual (6SE701 9511),
for a full description on how to set up and operate
tm
your ProDriver display.
Button functions
Displays main menu or previous
MENU
menu level.
Displays selected menu options;
INFO
saves new data.
UP
DOWN
Button combinations
Press and
UP
time to store an incident record.
tm
active time, idle time,
. You must refer to Detroit
Move selection arrow
up or down, or move
from screen to screen
when multiple screens
are available
at the same
DOWN
Special button functions
Alternate labels are displayed along the bottom of
the screen directly over each button when the
buttons are used to perform special functions.
DISPLAY SCREENS
Idle time
Automatically displayed when engine is idling.
Shows idle time for current leg of the trip and as a
percentage of engine running time. A bar graph
shows the idle percentage compared to the fleet
goal.
Fuel economy
Automatically displayed when the vehicle is
moving. Shows average fuel economy for current
leg of the trip digitally and as a bar graph, with the
fleet goal centered on the screen. Instantaneous
economy is shown as a series of arrows. UP
arrows show an improving leg average, while
DOWN arrows show a decrease. The number of
arrows shows the amount of change.
Warning screens
Speeding, over revving, excessive idling and oil
change screens
acknowledged by pressing any button or the
condition ceases. The display will return to the
screen previously shown.
Alert screens
Shown if a warning condition exists with the
engine. Will be displayed until acknowledged by
pressing any button.
NOTE: Menu displays are available only when
the vehicle is stationary.
viewed with the ignition OFF by pressing
"MENU" .
To edit the main menu at idle
SCREEN,
IDLE
= IDLE SCREEN.
MENU
2 - 21
CONTROLS/INSTRUMENTS
will be displayed
The display may be
= MAIN MENU,
MENU
until