Drive Shields - MASSEY FERGUSON 9125 Workshop Service Manual

General Information

Drive Shields

FIG. 9: To open the top left-hand drive shield (1), pull the
rubber latch (2) out of the catch. Raise the left-hand drive
shield all the way.
NOTE: Make sure the end shield (3) is down before
opening the drive shield.
To open the bottom left-hand drive shield (4), open the top
left-hand drive shield. Pull the rubber latch (5) out of the
catch. Raise the bottom left-hand drive shield all the way.
To close a drive shield, put the drive shield in the closed
position. Install the rubber latch in the catch.
FIG. 10: To open the top right-hand drive shield (1), pull
the rubber latch (2) out of the catch. Lower the right-hand
drive shield all the way.
NOTE: Make sure the end shield (3) is down before
opening the drive shield.
To open the bottom left-hand drive shield (4), open the top
left-hand drive shield. Pull the rubber latch (5) out of the
catch. Raise the bottom left-hand drive shield all the way.
To close a drive shield, put the drive shield in the closed
position. Install the rubber latch in the catch.
02-10
3
1
4
FIG. 9
2
5
FIG. 10
2
5
N306912
3
1
4
N306905
4283389M1