Fire Extinguisher; Shields And Latches; Feeder House - MASSEY FERGUSON MF9005 Operator's Manual

Fire Extinguisher

FIG. 45: A fire extinguisher (1) is located on the cab
platform.
To release the fire extinguisher, pull the hairpin securing
the fire extinguisher to the bracket. Once out of the
bracket, follow the instructions on the fire extinguisher to
extinguish the fire.
IMPORTANT: If the instructions on the fire extinguisher
can not be clearly read, then the decal or fire
extinguisher must be replaced.

SHIELDS AND LATCHES

Feeder House

FIG. 46: To access the drives on the left-hand side of the
feeder house remove the left-hand feeder house shield.
To remove the forward shield (1), remove the four pins (2)
and nut (3) used to secure the shield to the feeder house.
To remove the rear shield (4), remove the hardware
holding the rear shield to the feeder house.
FIG. 47: To access the drive on the right-hand side of the
feeder house remove the right-hand feeder house shield.
To remove the forward shield (1), remove the four pins (2)
and nut (3) used to secure the shield to the feeder house.
To remove the rear shield (4), remove the hardware
holding the rear shield to the feeder house.
700735875 F Rev.
FIG. 45
4
2
1
FIG. 46
3
4
1
FIG. 47
SAFETY
1
D-12491
3
D-14260
2
D-14261
A-21