COMPONENTS ACCESS
End Shields
FIG. 7: To open an end shield (1), pull on both latches (2)
at the same time to release the end shield. Raise the end
shield all the way up.
NOTE: Make sure the top drive shield (3) is down before
opening the end shield.
FIG. 8: To hold an end shield open (1), raise the end
shield all the way. Align the hole in the end shield with the
pin (2) on the warning lamp. Remove the hairpin from the
storage bracket (3). Install the hairpin (4) in the pin on the
warning lamp.
To close the end shield, hold the end shield and remove
the hairpin from the pin on the warning lamp. Install the
hairpin in the storage bracket. Close the end shield.
4283389M1
General Information
1
FIG. 7
1
FIG. 8
3
2
N306918
4
2
3
N306991
02-9