FIG. 11: When parking, put the machine on a solid level
surface and lower the header to the ground. Put all
controls in neutral, center and lock the steering wheel,
and engage the parking lock control lever. Stop the tractor
engine and take the key with you when parking the
machine.
m
WARNING: Do not leave the machine
unattended with the header raised. Lower
the header fully before leaving the machine.
A sudden loss of hydraulic pressure can
cause the header to drop without warning.
TRAVEL ON PUBLIC ROADS
FIG. 12: Use the lighting and marking system supplied
with the machine when roading. Make sure all the
flashers are operating prior to driving on the road. Make
sure the reflectors are installed, in good condition, and
wiped clean. Be sure the SMV emblem is clean, visible,
and correctly mounted on the rear of the machine.
Familiarize yourself with and obey all road regulations
which apply to your machine. Consult your local law
enforcement agency for local regulations regarding
movement of farm equipment on public roads.
Adjust travel speed to maintain control at all times. Limit
speeds to 24 km/h (15 mph). Be aware of other traffic on
the road. Keep well over to your own side of the road and
pull over, when possible, to let faster traffic pass.
Be aware of the overall width and length of the machine.
Be careful when transporting the machine on narrow
roads and across narrow bridges.
Always travel with the header as low as possible. DO
NOT drive with header up and the lift cylinder stops in the
locked position. See Cylinder Stops in this division for
more information.
4283389M1
FIG. 11
FIG. 12
Safety
D-7084
S-1025
01-9