Page 2
Brief Introduction This user manual includes function introduction, installation, wiring, operation and solutions. In order to confirm your proper operation, please read this manual before using; keep the manual in a safe and convenient place for quick response when problems appear. Note: ...
Contents Chapter I Summary and System Structure ......1 1. Summary ............1 2. Checking the Package ........1 3. Components and Functions ......3 4. Install SIM and TF Card ........8 5. Main Features ..........8 Chapter II Specifications and Basic Functions ....9 1. Technical Specifications ........9 1.1 xDSL Index (Optional) ......9 1.2 Optical Power Index (Optional) ...10 1.3 Visual Fault Locator (Optional) ...11...
Page 4
1.10 E Netcom Test ........46 1.11 Download Meter ........47 1.12 FTP Client .........49 2. ONU Log In ...........49 3. Test Set ............51 4. Records ............53 5. Barcode Scan Test ........54 6. How to Install the USB Driver .......55 Chapter IV Faults and Solutions ........57...
Chapter I Summary and System Structure 1. Summary PDA is designed for meeting entire network requirement, whose functions including xDSL test, LAN test, optical power test, visual fault locator, cable tracing, check line sequence, DMM test, IPTV test, and landline telephone test. PDA can test many kinds of connect mode, including XDSL, LAN, Optical fiber.
Page 6
Communicati Module Module classification on module code Unicom/ Blank With Telecom FDD/TDD/WCDMA/EVDO/CDMA/GSM Mobile With TDD/TD-SCDMA/GSM Telecom With FDD/TDD/EVDO/CDMA/GSM Unicom With FDD/TDD/WCDMA/GSM Function Module Module classification Remark module code xDSL ADSL2+ module optional VDSL2 module optional Bar code scan 1D Bar code optional Optical power Optical power module...
For example, PDA -AG: Unicom/Telecom module PDA with ADSL and optical power module 3. Components and Functions...
Page 9
Name Function Connect with the fiber interface, VFL port red light test fiber optic connection Optical power Connect with the fiber interface, port test optical power Dust-proof cap of Protect the optical port from dust optical port and water Window of bar code scanning Scanning head engine, which is used to scan the bar codes.
Page 10
Seat-type Seat-type charger anode charger anode Protect RJ11, RJ45, USB and Bottom dust- charge port, protect from dust and proof cap water Receiver Receiver Front camera Make a photo or video Indicate the conditions of the Indicator equipment Display Screen display Landline telephone function MIC Function key, detailed function as Keyboard...
Page 11
SCAN side key Scan shortcut key RFID side key RFID shortcut key Earphone hole Connect earphone Adjust volume of phone call or the Volume key loud speaker Cable Tracing Receiver Name Function Receiver Antenna probe probe Test button Press it to test the signal Indicator Indicator of check line sequence Earphone...
Turn it down to open the receiver Volume and increase the volume, turn it up adjustment to decrease the volume till to take off. Loudspeaker Audio signal generator loudspeaker 4. Install SIM and TF Card Open the battery cover, take out the battery, will show SIM and TF card slot, insert SIM, TF card as the icon show.
WCDMA Broad band B1/B2/B5; GSM Broad band B2/ B3/B8 ➢ Rechargeable 3.8V 8200mAh polymer battery ➢ Can make a phone call in earphone and listen to music. (needs earphone) ➢ Support 1D bar code scan ➢ Support HF RFID 13.65MHz (optional) ➢...
◆ The maximum rate and capacity ratio of upstream Channel and downstream channel ◆ The modulating bits in the DMT sub-channel: 0~15 and each sub-channels' frequency points ◆ The number of error codes (CRC, HEC, FEC, NCD, OCD) ◆ The output power of DSL ◆...
2.3 Electromagnetic Touch Screen (Optional) Electromagnetic touch screen can realize original write function. Choose menu, then open electromagnetic screen, at this time, can touch the equipment with electromagnetic pen and hands. 2.4 Open / Close Network Card To open the device's card, pull down the prompt bar and click the LAN icon (blue icon means the net card turned on, white means closed.) as shown below:...
2.5 PPPoE Dial To make PPPoE dial, you need to pull down prompt bar and click PPPoE icon (blue icon means PPPoE dial is connected, while white means PPPoE disconnected), PPPoE Properties pictures are as below: Input user name and password, click connect to establish PPPoE link.
Keep pressing the icon, you can move where you want. Then release, in this way, you can put the function what you like desktop. (during moving, keep pressing the icon and do not release) 1. Test Function The test function is professional test software, which includes xDSL test, Modem emulation, optical power test, visual fault locator, network layer test, E Netcom, download meter, FTP client, etc.
Please see the details: 1.1 xDSL Test (Optional) Through inner xDSL Modem, you can test xDSL line. It includes Physical layer test, Modem setting, web and Network layer test.
Page 20
xDSL login interface Physical layer test can test physical layer parameter, which includes xDSL connection status, connection mode, upstream/downstream, noise margin, attenuation, the output power, error codes of CRC, HEC, FEC, NCD, OCD and channel bits picture. Using this function, user can check whether there is a problem in the user line or not, and check the user line parameter, resolving the problems due to users' Modem and computer.
Page 22
VDSL2 Error codes statistics The current status means: Handshake: Shake hands Discovery: Discover the local side DSLAM; Training: It is training; Showtime: Distal end DSLAM is connected. Connection mode means: G.DMT: ADSL G.DMT protocol mode, in accordance with ITU-T G992.1 standard; G.LITE: ADSL G.LITE protocol mode, in accordance with ITU-T G992.2 standard;...
Page 23
ADSL2+ Bit Graph ADSL2+ Bit Data VDSL2 Bit Graph VDSL2 SNR Graph...
Page 24
VDSL2 Bit Data VDSL2 SNR Data Physical layer parameter: Activating times: Display the active times from the beginning of test to current time, the activation time will increase one with each active. Test Duration: Display the time from starting physical layer test after initialization of the Modem.
Page 25
Note: If the MODEM mode is modified as another kind, please exit the xDSL Test and re-enter it again. Otherwise, the MODE modifying will not be effective. Modem parameter setting interface is as following: ADSL 2+Modem parameter setting interface...
Page 27
PPPoE Dial PPPoE is in the status bar, pull-down, as shown following: Click icon, the dialing window will pop up, input user name and password, click connect to do the PPPoE dial, the equipment will memorize user name password automatically. User can test the web browsing after dial succeed.
Page 28
Internet After PPPoE dialing successful, click web icon to open the browser and input the address, and then click the triangle arrow or click OK on the keyboard to enter into the website. User can test the connectivity of the xDSL line. After entering Back, you need to choose Close modem power supply or keep modem power supply.
Page 29
xDSL user line xDSL test wiring diagram Entering into xDSL test, then click physical layer test interface, it can show data of activation situation, etc. When activation indicator up for long time, the line activated, it can show the up/down stream rate, noise margin, attenuation, the output power, the number of error codes (CRC, HEC, FEC, NCD, OCD) and parameter as channel bits picture, etc.
Page 30
At the moment the PDA is a xDSL Modem with Ethernet port. It can emulate user’s Modem (If the VPI/VCI value needs to be modified, please modify it from Modem Parameter setting in the xDSL test), PDA can used as Modem to realize PPPoE dial through PC.
Ethernet line xDSL user line Modem emulation wiring diagram 1.2 DMM Test (Optional) Specification 1. DC Voltage: -400 to 400 V; Resolution: 0.1V 2. AC Voltage: 0 to 290 V 3. Capacitance: 0 to 1000nF Accuracy: 0-10nF: ±2nF, 10nF-1000nF: ±2 %±2nF 4.
Page 32
Maintenance personnel can use these functions to test if there is danger voltage on test line or the existence of 48 V voltage on the telephone line, estimate cable length and inspect characteristic on the telephone line. As the Picture: DC voltage test The voltage test can test if there is a signal in the line.
Page 33
Loop resistance test Use resistance test function can determine the length of cable. Conversely, if you know the length of the cable, the resistance test result will show whether the cable connection is good or not. (Km)---------------------------① Calculation formula: L=R ①: RL is resistance measurements result (Ω), RO is the resistance (Ω) per kilometer.
Page 34
Capacitance test Use of capacitance test function can judge the length of lines. If there is no bridge tap or waterish logged, we can get the length from the test result of the capacitance. Calculation formula: L=C (Km)----------------------------------② ②: C for capacitance test result (nF), C capacitance result (nF) per kilometer.
Insulation test can test the insulation status of the line. If the insulation resistance value is small, means the insulation is bad, this will affect the ADSL line transmission quality and need to repair. Generally for ADSL line, insulation resistance value should be more than 10 M Ω.
Page 36
value. It is shown as dBm and nW when having a test. User can stop testing by pressing "Stop Test", and the data displayed is the latest testing result. You can also choose save current test result, in help of checking afterwards. As following: User can modify the file name themselves.
Page 37
Input the name of the line to separate different lines. Inspection significance: test different positions optical power value on one fiber, then draw the power curve (test curve is similar to the OTDR), you can view any attenuation values between 2 points. After establishing inspection mission, click on the inspection button, current optical power value will be added to the inspection record end and will be displayed by the curve...
1.4 Visual Fault Locator (Optional) Click "Red Light", the tester can be used as the visual fault locator, can output the CW and 2Hz modulation. As follows:...
Click "Open" to turn on the VFL, and click "Close" to turn off the VFL. CW/2Hz is the switch button of the continuous and modulated light, the tester can memorize the VFL mode automatically. The output power is 1mw/3mw/5mw/10mw (optional). 1.5 Cable Tracing (Optional) Tester can do cable tracing, twisted pair and line distinguish.
Cable tracing interface Click “Open” to start cable tracing, tester start sending video signal, and then click "Close" to stop the video signal sending, and user can exit cable tracing by pressing return. Turn on the receiver, connect the RJ11 test line to the cable needed to be test, and the click "Open"...
Check line sequence interface Click “Open”, the machine starts sending the pulse signal, click “Close”, the device stops sending the pulse signal, press the return key to exit check line sequence testing. Open the icon, connect the testing cable to the RJ45 port on the lower end of the device, the receiver should be connected to the other end of the cable, and then click the “Open”...
Page 42
Losted num: data statistics of RTP package loss number gathered in the sampling period IP Jitter: reflect levels of IP packet transmission quality Net configuration Support any net encapsulation format, include TS, TCP, UDP, RTP, RTSP, PPPoE etc. MDI DF: Delay in MDI test regulated by RFC4445 MDI MLR:Media package loss number in MDI test regulated by RFC4445 Source MAC: IPTV sender MAC Dst Mac: STB MAC...
Page 43
Prepare to test Function: Prepare for IPTV Test Instructions: Put the network cable which used to connect with the IPTV set-top box to telecom test PDA Port 1, then use another cable connect the telecom test PDA Port 2 with IPTV set-top box. Play the TV show which you want to test.
Page 44
Stop test Function: Stop IPTV Test Instructions: Click “ ” button to stop the IPTV test, the interface still show the last test result: Exit IPTV test Function: Exit IPTV Test interface Instructions: Click “ ” button to exit the IPTV test interface: IPTV test mode...
Mode: Listener way IPTV business: Monitoring login authentication, monitoring the received video stream 1.8 Landline Telephone Function (Optional) Main functions of landline telephone: Dial and receive telephone Operate Instruction: Functions Instruction: Landline telephone test Use Instruction: In Android interface, click “Test” to enter, and then click “Landline Telephone”...
Page 46
Prepare to test Function Instruction: Prepare to test landline telephone. Use Instruction: Put the telephone line to the xDSL port of telecom test PDA Start testing Function Instruction: Begin to test landline telephone Use Instruction: Dial Click the green button on the left bottom of the interface to enter Off-hook state, then the green button changed to red, the entered phone number will be dialed automatic.
Page 47
Redial On Off-hook state, there will be 10 numbers appear, click will ok, long time entrance will delete the one you want. Or click the right bottom red button to redial the last time number. Receive The left bottom green button will swing back and forth when there is a call, click the button to receive the call, click after finishing the talk.
Click the “Back” button twice continuously to exit the Landline Telephone test 1.9 Network Layer Test Network layer test which including Ping test, Ifconfig test, Route test and Traceroute test. Sliding screen can switch test items. Ping test Type IP address or domain name; choose the data package size and Ping times.
Page 49
Click "Yes" to see current network information. Route test Click "Yes" to check the current web information.
Traceroute test Typed the destination address, choose overtime, click "Yes". 1.10 E Netcom Test Click "Search Device" to look for the network equipment in the local network. The tester support both LAN and WIFI, and the network type can be chosen from the interface. The IP, MAC address and host name of the equipment will display on the interface.
1.11 Download Meter Download speed test can test the web download speed, reflect the web state directly. Can browse the download attachment by entering the website, and user can also download the well-settled attachment in menu. (the homepage and the address of attachment download is settled in setting) Click "Start", the following interface will be shown:...
Page 52
Tester will statistic the max and average download speed and download progress, the screen will display as follows after finishing download:...
1.12 FTP Client FTP Client can log on FTP server, upload and download programs like the following picture: Typed FTP server address, user name, password and port number, and then clicking "Connect" can log on FTP server. The system will memorize the logged on FTP server address, user name, password and port number.
Page 54
ONU equipment address is IP address of ONU equipment. Before login, please confirm the device and tester has connected through network line, and then click ONU equipment address, it will appear ONU equipment address window, user choose and write device address, click "Yes" can login WEB page.
Enter the user name and password, and login the configuration page of WEB, double-click the browser to enlarge the content, slide the screen to view the different area of the web page. 3. Test Set Test setting used in device test software setting, including ONU equipment address, Modem power off time setting, About, like the following picture:...
Page 56
ONU equipment address This option is setting for SN equipment default IP address; can setup four IP address. Modem power off time setting...
It is used to setup Modem working time; over the setting time, Modem will shut down. As following: About Device software version and company contact information: 4. Records Browse the saved test records. See the picture:...
Note: When the device name showed, if the name is too long, it will intercept appropriate name automatically. Click corresponding test records can open and check records. 5. Barcode Scan Test Barcode scan test interface is shown as below:...
In the "Read Serial" interface, after pressing "SCAN" key on the left side, it can work. Just aim at bar code with the red light the test result will show on screen. Tester can scan continuously and show the scan result in table, and record the scan time.
Page 60
Close the installation window; computer will display a more drive as (drive code will change with the number of computer drives). Open the Disk, the content will be as following: Click install the cell phone driver only, the following window will pop up:...
Then click install again, wait for a while, the driver installation will be finish, the program will display as following: Click OK, and restart PC to enforce the program. Chapter IV Faults and Solutions If you meet the following problems during the using process, please try to use the "Faults and Solutions"...
Page 62
Clean the messages of built-in multimedia promptly Some programs The storage and other application can't be used space is not programs as well as the normally. enough. download application records. The battery performance Change the battery. The standby declines. time is not Play games and enough.
Page 63
call. fault equipment card. Dialing error Redial Reach to the Contact with the operator. cost limit. Invalid button Get accident Remove the battery and operation interference. then install 1 minute later. The telephone Check the telephone number digits number. Some calls exceed the limit.
Page 64
Error of Input the wrong Please contact with the automatically password. appointed after-sale service locking (forget the center. password password) Battery low Please charge. The equipment Check whether setting the Setting reason is automatically auto power-off or not. closed Get accident Restart interference.
Need help?
Do you have a question about the XL-DM327G and is the answer not in the manual?
Questions and answers