Setting Watering Day Schedules - DIG 400A Instruction Manual

2. If the current time has not been set or needs to be updated press
hour digit starts flashing.
3. To set the current hour, press
4. To set the minutes, press again and the minute digit starts flashing. Press
the or to set the current time in minutes.
5. Repeat the steps to set the current date including, month, day and year. When
the date is selected and updated, the day of the week will be update at the
same time to correspond with the date.
MONTH DAY YEAR
or (note AM and PM designations).
6
Press to move backward. Press
SET DAYS

9. SETTING WATERING DAY SCHEDULES

and the
Option 1 – Setting Specific Days of the Week:
This setting determines which days the 400A controller will operate. Choose either
watering on specific days of the week, EVEN/ODD days or cyclical from daily up to
once every 30 days. The timer's default setting is to water on all specific days of
the week.
For example, if you want to water every Tuesday, Thursday and Sunday:
1. Press the
the screen.
2. Press
3. Press,
de-selected.
4. Press
5. Press and the underscore under W (Wednesday) disappears. Wednesday is
de-selected.
6. Press
7. Press and the underscore under F (Friday) disappears. Friday is de-selected.
, to proceed to the next step,
or to review the program.
button until the icon and the days of the week appear on
once and M (for Monday) starts flashing.
and underscore under M (Monday) disappears. Monday is
twice and W (for Wednesday) starts flashing.
twice and F (Friday) starts flashing.
7