Setting Rain Delay - Optional Feature; Manual Watering - DIG 400A Instruction Manual

Battery powered anti-siphon valve irrigation controller

Hide thumbs Also See for 400A:

Table of Contents

12. SETTING RAIN DELAY – OPTIONAL FEATURE

The Rain Delay setting is used to temporarily suspend all irrigation for a deﬁned

number of days. For example, during rainy weather regularly scheduled programs

can be turned off from 1-99 days. At the end of the designated period, regularly

scheduled programming will resume automatically.

To set a temporary suspension of the program:

1. Press the

button until the

2. Press the

button and OFF starts ﬂashing.

3. To set the desired temporary suspension of the program (1-99 days), press

icon and OFF appear.

4. The temporary suspension of the program can be cancelled at any time by

re-entering Rain Delay screen and changing the setting to OFF. (Press

until OFF appears.)

Note: OFF appears in between numeric value of 99 and 1.

Press the

button to review the program or to exit.

The manual mode allows the user to test the system and water for a specified run

time set in watering duration. The timer will automatically stop watering at the end of

the defined irrigation period. The originally programmed irrigation schedule continues

to function at the times assigned. The sensor condition is disregarded in this mode.

To start a manual run,

1. Press the

button, and the

momentarily and then the last watering duration is displayed with

The timer will open the valve and in 5 seconds a count down of the remaining

irrigation duration appears, showing when the timer will close the valve.

2. Press the

button to end manual run.

3. After 5 seconds the display will revert to the current time screen.

icon and

icon appears. ON appears

Table of Contents