Table of Contents
Related Manuals for DIG 410B T Series
Summary of Contents for DIG 410B T Series
- Page 1 410BT Series Bluetooth ® Battery Powered Irrigation Controller 410BT-000 | 410BT-075 | 410BT-100 | 410BT-150 | 410BT-200 I N S T R U C T I O N M A N U A L FCC certified | Bluetooth® certified | Waterproof | 3-year Limited Warranty...
-
Page 2: Component Identification
2. ABOUT THE 410BT BATTERY OPERATED CONTROLLER The 410BT series irrigation controller employs the latest in Bluetooth® technology using the free DIG BTT app for Android™ or iPhone®. The 410BT is available as a single station battery operated controller and is powered by two AA batteries that can last up to one year using name brand alkaline batteries. -
Page 3: Installing The Batteries
4. INSTALLING THE BATTERIES 1. Open the battery compartment cap by turning it counterclockwise. 2. Install two fresh, brand name, AA alkaline batteries (not included) and note the proper direction of the positive and negative orientation on the underside of the controller. 3. - Page 4 counter clockwise 1/2 to 3/4 of a turn, or until you hear or see water flowing through the valve. To turn the water off, turn the solenoid clockwise 1/2 to 3/4 of a turn and wait a few seconds for the valve to close.
- Page 5 Above-ground installation Below-ground installation 7. PROGRAMMING • Download the DIG BTT app using the iOS App Store, Google Play, or the QR code on the box. • Open the DIG BTT app from your smartphone or tablet and use the instructions in the App Screens Overview to program and operate the controller.
- Page 6 APP SCREENS OVERVIEW The DIG BTT app automatically scans for nearby controllers after installation. Any DIG Bluetooth® controllers within 50′ (15 meters) line of sight will appear on screen. • Your new controller will appear as the BT Controller. Its default image, status (watering -on- or not watering -off-), connection strength, and battery life will appear alongside it.
- Page 7 Information icon Controller name Default image Last run information Battery life Indicates if controller is Connection currently strength runnning or not...
-
Page 8: Home Screen
HOME SCREEN Once connected, the Home screen will appear. This screen has everything needed to program the controller. By default, the controller’s Program is off. To turn it on, push the switch under the “Program” area. It will turn green and the Program area will light up indicating that the program is active and can now be modified. - Page 9 Picture of controller Schedule Overview: Shows a chart with current program run times. Red lines indicate that there is an overlapping Program start time schedule Activate or deactivate the program Weekly days settings Up to five start times. Select an existing start Run time for time to edit/...
-
Page 10: Controller Settings
CONTROLLER SETTINGS The controller’s Settings screen contains everything else needed to fully control your irrigation system. It can be reached by selecting the Controller Settings button on the bottom of the screen. On this screen you can turn on or off the entire system through the System Active switch, add a rain delay to shut off the controller for a limited time, budget each month to modify the watering duration based on the season, set specific dates on which the timer should not run, and view... - Page 11 Turn the entire system on/off. Controller will not water when system is off Set a rain delay Budgeting per month (affects duration Set up to nine only) dates where the controller View monthly will prevent watering watering history for the past 12 months Set name of the controller...
-
Page 12: Manual Run
MANUAL RUN The Manual Run screen allows for manual operation of the controller. It can be reached by selecting the Manual Run button on the bottom right of the screen. To manually run the controller, tap the button on the right of the screen. - Page 13 Start/Stop Manual Run Manual Run duration Manual Run...
-
Page 14: Reset To Factory Defaults
Should you encounter any problem(s) with this product or if you do not understand its many features, please refer to this operating manual first. If further assistance is required, DIG offers the following customer support: • DIGPRO Technical Service USA: DIG’s Technical Service Team is available to answer questions in English and Spanish from 8:00 AM to 5:00 PM (PST) Monday-Friday (except holidays) at 1.800.344.2281 or... - Page 15 I. Changes or modifications not expressly approved by DIG Corporation could void the user’s authority to operate the equipment. II. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. ...
-
Page 16: Warranty
Repair of damaged units not otherwise within warranty may be refused or done at a reasonable cost or charge at the option of DIG CORPORATION. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.