Advertisement
Quick Links
Advertisement
Related Manuals for DIG 12 Outlet Drip Manifold
Summary of Contents for DIG 12 Outlet Drip Manifold
- Page 1 12 Outlet Drip Manifold I N S T R U C T I O N M A N U A L...
- Page 2 1. TOP 12 OUTLET DRIP MANIFOLD ″ riser, above DIG TOP 12 outlet drip irrigation manifolds are designed to be adapted to any ⁄ or below ground. They may be incorporated into a new system, or used to convert existing sprinkler risers into 12-Outlet drip systems.
- Page 3 ″micro tubing to 4. Remove the cover and the Mini-Disk filter. Attach ⁄ ″ micro tubing, first connect the outlet side (see Figure 4). If using ⁄ ″ converter barb onto the ″ micro tubing (see Figure 5) and ⁄ ⁄...
- Page 4 8. Pressurize the system and verify that the TOP manifold is properly functioning and if needed, make any necessary corrections. When designing a system, we recommend that the maximum length of micro tubing from each outlet should not exceed 8-10′. Longer lengths may certainly be achieved, but please consider the factor of maintenance and aesthetics.
- Page 5 5. RECOMMENDED NUMBER OF OUTLETS PER PLANT Figure 11 6. ABOVE OR BELOW GROUND INSTALLATION Using ⁄ ” Micro tubing Above Ground Below Ground 4-8" 1-2" 4-8" 6-8" 1-2" 6-8" 4-8" 4-8" ″ micro tubing ″ Riser 1. Bug plug for ⁄...
-
Page 6: Part List
150 lbs. per square inch. This warranty shall extend only to the original purchaser of the product for use by the purchaser. The obligation of DIG CORPORATION under this warranty is limited to repairing or replacing at its factory this product which shall be returned to the factory within one year after the original purchase and which on examination is found to contain defects in material and workmanship.