Advertisement
714-630-7144
•
Failure to read instructions.
•
Loss of balance while loading.
•
Slippery surfaces (wet, snow and/or icy surfaces are dangerous to
load and unload on).
•
Trailer not properly connected to tow vehicle. This is a common
and expensive error causing the trailer to tip up and run into the
back of your tow vehicle and also causing a possible fall in the
loading process. This can also cause expensive damage to tow
vehicle.
•
Loading a vehicle when under the influence; load and unload with
the same mental capacity needed for riding or driving.
•
Rider Error.
This is not a complete list of all risks. Physical strength, weight of vehicle and
riding skills all vary widely. Only you can determine your comfort level
through safe practice. Kendon wants you safe!
Loading and unloading a motorcycle onto any vehicle, either a trailer or a pick-
up truck requires certain skills and techniques. Kendon recommends using two
spotters while practicing the loading and unloading technique with your bike
with your abilities. Most incidents occur from first time users with no experience
in loading and unloading a motorcycle. Practicing the process with two spotters
is highly recommended. For your added protection, Kendon recommends
wearing your safety riding gear during the loading/unloading process.
LOAD, UNLOAD AND TOW AT YOUR OWN RISK. KENDON INDUSTRIES,
LLC IS NOT RESPONSIBLE FOR ANY INJURY, LIABILITY, PROPERTY
DAMAGE AND/OR CONSEQUENTIAL DAMAGE(S) CAUSED BY LOADING
AND UNLOADING A VEHICLE.
If you have any questions or need additional help or instructions, please contact
us directly at 714-630-7144 or info@KendonUSA.com.
Most Common Hazards
Loading and Unloading Process
- 5 -
www.KendonUSA.com
Advertisement
